Redundant power system with on line
Hot-swap and hot-plug function
AC active PFC input design
Provide LEDs display, buzzer alarm
Power defective signal warning functions
| Features: | |
| 250~910 W, 6 output Redundant power system with on line Hot-swap and hot-plug function AC active PFC input design Provide LEDs display, buzzer alarm Power defective signal warning functions |
|
| Specifications: TOP | |
| Parameter | Description/SPEC.: |
| Input voltage | 90~264VAC |
| Input frequency | 47 ~ 63 Hz |
| Input current | 5A max. |
| Inrush current | 80A max. at cold start |
| Output voltage | see model list |
| Efficiency | Over 65% at full load, nominal line |
| Leakage current | 0.75mA max. at 240VAC input |
| Hold-up time | 16mS (max.) at full load |
| Power up time | 800 msec. (max.) at full load |
| O.V.P | On +5V, +12V, and +3V |
| Short circuit protection | on all outputs |
| Operating temperature | 0” ~ 50” |
| Remote on/off | TTL high / PS off, TTL low/PS on |
| EMC standard | EN55022 class B, and CE requirements, complies with FCC class B, CISPR |
| Safety standard | UL / CUL 60950, TUV and CB EN60950 |
| Notices: TOP |
|
|||||||||
| No. | Model | Input | Output | Iomin | Iomax | Load Reg. | Power | ||
| 1. | PRB250QH | 90~264 VAC | + 5.00VDC + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC |
2.00A .00A .00A .00A .00A |
25.00A 14.00A 20.00A .50A 2.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
250.000(w) | ||
| 2. | PRB350MH | 90~264 VAC | + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC + 5.00VDC |
.00A .00A .00A .00A 2.00A |
20.00A 28.00A .50A 2.00A 45.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
350.000(w) | ||
| 3. | PRB350MV | 90~264 VAC | + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC + 5.00VDC |
.00A .00A .00A .00A 2.00A |
20.00A 28.00A .50A 2.00A 45.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
350.000(w) | ||
| 4. | PRB460QV | 90~264 VAC | + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC + 5.00VDC |
.00A .00A .00A .00A 2.00A |
25.00A 32.00A .90A 3.60A 45.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
460.000(w) | ||
| 5. | PRB630MV | 90~264 VAC | + 5.00VDC + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC |
2.00A .00A .00A .00A .00A |
45.00A 20.00A 28.00A .50A 2.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
630.000(w) | ||
| 6. | PRB650QV | 90~264 VAC | + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC + 5.00VDC |
.00A .00A .00A .00A 2.00A |
36.00A 52.00A 1.30A 5.20A 65.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
650.000(w) | ||
| 7. | PRB910MH | 90~264 VAC | + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC + 5.00VDC |
.00A .00A .00A .00A 2.00A |
52.00A 73.00A 1.30A 5.20A 117.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
910.000(w) | ||
| 8. | PRB910MV | 90~264 VAC | + 12.00VDC + 3.30VDC - 5.00VDC - 12.00VDC + 5.00VDC |
.00A .00A .00A .00A 2.00A |
52.00A 73.00A 1.30A 5.20A 117.00A |
±3.00% ±3.00% ±3.00% ±3.00% ±3.00% |
910.000(w) | ||
| Remark: TOP |
| * With start up and stand by power +5Vsb / 2A. |
TOP